CENOS : Simulation Software : Induction Heating : Radio Frequency : Wireless Charging
  • Products
    • Radio Frequency
    • Induction Heating
    • Wireless Charging
    • Electromagnetic Stirring and Pumping of Liquid Metals
    • Busbar Heating
  • Resources
    • News and articles
    • Case studies
    • User stories
    • Academic stories
    • Testimonials
  • Documentation
  • Academic
  • About
  • Contact
  • Book a demo
  • Menu Menu
Induction chain hardening: case study

Induction chain hardening: case study

November 14, 2024/in Case studies, Induction Heating

The process of induction hardening a chain brings its own set of challenges. Chains, used across industries from automotive to construction, require durability, flexibility, and the right balance of hardness to withstand substantial forces.

They’re made of steel rods shaped into interconnected links, each one needing consistent and thorough hardening for maximum strength. However, unlike simpler geometric forms, chains have a complex structure that complicates the uniform application of heat.

https://cenos-platform.com/wp-content/uploads/2024/11/induction-hardening-of-a-chain.mp4

Video from Himmelwerk YouTube channel

The video demonstrates the induction hardening setup by Himmelwerk (www.himmelwerk.com), a longstanding client and user of CENOS simulation software. (There is also a short article published, how Himmelwerk focusing on importance of heating simulations for additive manufacturing coils.)

Here’s an overview of the process:

  • Induction hardening process: The setup in the video shows a chain moving through an induction coil. As each link passes through the coil, it undergoes rapid heating, important for achieving the required hardness profile. The induction coil creates an alternating magnetic field, inducing electrical currents within the chain links, which generates heat specifically within the skin-depth from the surface depending on the frequency of alternating current. This targeted heating allows precise control, ensuring each link is uniformly hardened.
  • Movement and hardening control: The video highlights how the chain’s movement speed through the coil impacts the hardening outcome. Moving at a carefully controlled speed, the chain ensures that each link receives adequate heat without overhardening or leaving any areas too soft. This balance is important, especially for parts like automotive or industrial chains, where uneven hardness could lead to premature wear or failure.
  • Cooling phase: The simulation concludes with a cooling phase, where the chain is quenched to lock in the hardness. This phase is important for completing the hardening process and making sure that the mechanical properties are achieved as required.

Himmelwerk has been using CENOS simulation software for years and have expressed satisfaction with CENOS.

Here’s a quote from Himmelwerk CEO Dr. Andreas Seitzer:

“CENOS™ simulation software has been a great partner for us ever since getting into simulations for the first time all those years ago. They steered us towards a better choice of workstation for our needs, were available in real-time or through mail within hours whenever we needed them.”

What is the challenge?

Maintaining precise heat distribution during the hardening process is no small feat. Chains always undergo through hardening, which ensures durability throughout the chain link.

The chain’s movement through the inductor can vary, creating uneven heat profiles that impact the final hardness of each link. And with production often reaching tons of chain links, achieving energy efficiency and consistent hardening profiles is important.

 

 

Let’s break it down what we can see on this simulation animation.

Left side (simulation of heating process)

  • The left side of the animation shows a simulation of the chain links moving through an induction coil, which generates a magnetic field to heat the metal. The chain is colored blue at the start, indicating a cooler temperature.
  • As the chain links pass through the coil, they begin to heat up, with colors changing from blue to red, corresponding to the temperature scale on the side. This color gradient represents the heating process, where red indicates the hottest temperatures, achieving the necessary conditions for hardening.

Key observations include:

  • Progressive heating: Each link is heated as it moves through the induction coil. This gradual heating ensures that the metal reaches the target temperature for austenitization, which is essential for achieving the desired hardness.
  • Controlled heating area: The coil heats through the material of each link, demonstrating the effectiveness of the induction heating process for the through-hardening.

Right side (resultant hardening profile)

  • The right side of the animation shows a grayscale visualization of the chain, which likely represents the final hardening profile after cooling.
  • The darker areas on each link may indicate regions where the hardening effect was successfully achieved, while lighter areas show parts that were less affected or cooled down post-heating. This allows engineers to assess the uniformity of the hardening effect across each chain link.

Overall, this simulation provides a clear view of:

  • Heat distribution during hardening: Engineers can evaluate the effectiveness of the coil setup and identify any regions that might require process adjustments for consistent heating.
  • Final hardening profile: The right side serves as a quality control visual, helping engineers verify that the hardening process has evenly treated each link, important for ensuring chain durability and strength.

This simulation helps engineers using CENOS software refine process parameters for optimal hardening, offering an efficient way to virtually test and perfect induction hardening setups for complex shapes like chains.

What is the solution?

For engineers and manufacturers looking to tackle the complexities of induction hardening chains, simulation software offers an efficient, precise solution. With the help of CENOS simulation software, customers like Himmelwerk are discovering new efficiencies in optimizing the induction hardening process.

By visualizing each stage, engineers can see exactly how heat distributes across the chain, spotting potential overheating or under-hardening zones before any physical testing is required.

 

This digital simulation enables engineers to set parameters like a chain speed of 1 cm per second through the inductor, and observe the resulting hardness profile. The process doesn’t just stop at heating, it extends to cooling.

After heating, chains are typically quenched in a cooling bath to lock in the hardness. Simulation allows manufacturers to adjust parameters for optimal austenitization, ensuring the chain’s surface and core meet strength requirements without risking overheating.

In this simulation:

  • Heat distribution: The color gradient shown on the chain links indicates the temperature distribution as each link moves through the induction coil. Links in the coil’s vicinity are heated to high temperatures, visible in the red-orange color, indicating areas where austenitization occurs (the temperature required to transform the steel structure for hardening). Engineers can observe whether the temperature reaches the target across the entire link surface, which is crucial for achieving a uniform hardening profile.
  • Localized heating: The simulation demonstrates the through hardening effect, where the induced current heats the metal through. Engineers can use this visualization to ensure that either only the surface reaches critical temperatures or the induced current heats the entire element through.
  • Cooling considerations: As links move out of the coil, the color shifts back to cooler tones, indicating a drop in temperature. Quenching for chain hardening is the process of putting the chain into a bucket of water. Although, engineers might be interested to simulate how much does the temperature drop on the way from inductor to the water bucket, to be sure the chain still stays above the austenisation temperature threshold.
  • Parameter optimization: The simulation shows the chain links moving at a controlled rate through the coil, with parameters such as speed and power settings determining the final hardness. Engineers can experiment with these parameters in the simulation to identify optimal settings that balance energy efficiency and hardening effectiveness.
  • Troubleshooting overheating: Any excessively high temperatures or areas that do not reach target temperatures can signal the need for adjustments. This simulation helps engineers detect and take these issues into account in the virtual environment, saving time and materials during the physical testing phase.

What is the result?

Implementing simulation in the induction hardening process for chains leads to improvements in both quality and efficiency. By identifying the ideal heating profiles and process parameters through virtual testing, engineers can reduce wasted energy, cut down on costly rework, and ensure each link meets strength standards.

Himmelwerk’s use of CENOS software shows how engineers have the power to perfect their hardening processes, achieving balanced, consistent hardness in every chain link.

For manufacturers, this isn’t just about better chains, but it’s about setting new benchmarks in quality assurance, efficiency, and cost-effectiveness.

As simulation technology continues to evolve, companies that actively use these tools will produce better products and strengthen their position as leaders in their fields.

Print Friendly, PDF & Email
Share this entry
  • Share on Facebook
  • Share on X
  • Share on WhatsApp
  • Share on LinkedIn
  • Share on Tumblr
  • Share on Vk
  • Share on Reddit
  • Share by Mail
https://cenos-platform.com/wp-content/uploads/2024/11/induction-chain-hardening-case-study.webp 1117 1691 developer /wp-content/themes/cenos/images/layout/logo.png developer2024-11-14 21:41:372024-11-15 13:17:08Induction chain hardening: case study

Browse by Categories

  • Academic
  • Antenna Design
  • Busbar Heating
  • Case studies
  • Electromagnetic Stirring and Pumping
  • General news
  • Induction Heating
  • Radio Frequency
  • User testimonials
  • Wireless Charging

Latest in Blog

  • Catheter tipping case study: making better medical devicesApril 10, 2025 - 11:39 am
  • How simulation improves surface hardening for vice components
    How to use FreeCAD and CENOS simulation to improve surface hardening for vice componentsApril 1, 2025 - 1:09 pm
  • Optimizing solidification simulation in electromagnetic stirring applications: case study
    Optimizing solidification simulation in electromagnetic stirring applications: case studyJanuary 29, 2025 - 4:20 pm
  • Using simulation software to improve micro mobility mechanics
    Using simulation software to improve micro mobility mechanicsDecember 10, 2024 - 4:34 pm
  • Wireless charging of industrial robots: case study
    Wireless charging of industrial robots: case studyDecember 6, 2024 - 8:32 pm

We are a software company on a mission to reshape the engineering process by providing engineers of all disciplines with truly accessible simulation tools for practical work.

caotica.ee veebidisain, kodulehe disain, veebi arendus, kodulehe arendus, kodulehe tegemine, wordpress arendus caotica.ee veebidisain, kodulehe disain, veebi arendus, kodulehe arendus, kodulehe tegemine, wordpress arendus

Products

Radio Frequency
Induction Heating
Wireless Charging
Electromagnetic Stirring, Melting and Pumping of Liquid Metals
Busbar Heating

Resources

Documentation
News and articles
Case studies
Testimonials
About
Careers

Get in touch

info@cenos-platform.com

Americas

C. Héroe de Nacozari 25B-int V-2210, Centro, 76000 Santiago de Querétaro, Qro., Mexico.
(US) +1 (708) 794 4046

Europe

Zeļļu iela 23, Riga, Latvia.
(EU) +371 27819253

Print Friendly, PDF & Email
© 2017–2025 CENOS™ SIA. All Rights Reserved. caotica.eu web design, web development, digital marketing, wordpress development caotica.eu web design, web development, wordpress development, digital marketing, online marketing
  • Privacy & Data Policy
  • Terms & Conditions
Scroll to top

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

AcceptSettings

Cookie and Privacy Settings



How we use cookies

We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.

Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.

Essential Website Cookies

These cookies are strictly necessary to provide you with services available through our website and to use some of its features.

Because these cookies are strictly necessary to deliver the website, refusing them will have impact how our site functions. You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. But this will always prompt you to accept/refuse cookies when revisiting our site.

We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience. If you refuse cookies we will remove all set cookies in our domain.

We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.

Other external services

We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.

Google Webfont Settings:

Google Map Settings:

Google reCaptcha Settings:

Vimeo and Youtube video embeds:

Privacy Policy

You can read about our cookies and privacy settings in detail on our Privacy Policy Page.

Privacy & Data Policy
Accept settings